Freight Class & Shipping Codes

PNEUMATIC TOOLS FOR CONST OR MINING, HAND-DIRECTED

ShipNerd provides discounted shipping rates for shipping pneumatic tools designed for use in construction or mining, hand-directed.

When shipping pneumatic tools designed for use in construction or mining, hand-directed via small package couriers such as UPS or Canpar Express, or LTL providers, be sure to specify any necessary special handling.

Use the quick quote tool to see the best shipping rates for your shipment of Machinery and Mechanical Appliances, Electrical Equipment, Parts Thereof, Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles.

Remember, package couriers only accept packages weighing up to 150lbs, and up to 165″ in length and girth combined. Shipments of Machinery & Appliances on pallets, or over these size and weigh limits will ship via LTL Freight using ShipNerd.

LTL Freight rates for shipping machinery and appliances on a pallet, but not packaged may incur additional fees.

HS: #846719

Harmonized System

The Harmonized System is a 6-digit coding standard for international classification of imported and exported products and commodities.

The HS number for pneumatic tools designed for use in construction or mining, hand-directed is #846719.

Schedule B: #8467195060

U.S. Export Commodity Classifications

United States export codes, more commonly known as “Schedule-B numbers” are based on the [international] Harmonized System and further classify the items you're shipping.

The Schedule-B number for “PNEUMATIC TOOLS FOR CONST OR MINING, HAND-DIRECTED” is #8467195060 based on the classification below.

CodeDescription
Section XVI Machinery and Mechanical Appliances, Electrical Equipment, Parts Thereof, Sound Recorders and Reproducers, Television Image and Sound Recorders and Reproducers, and Parts and Accessories of Such Articles
Chapter 84 Nuclear Reactors, Boilers, Machinery and Mechanical Appliances; Parts Thereof
Heading 67 Tools for working in the hand, pneumatic, hydraulic or with selfcontained electric or nonelectric motor.
Sub-Heading 19 Other
Statistical Classification 5060 PNEUMATIC TOOLS FOR CONST OR MINING, HAND-DIRECTED

NOTE: Schedule-B takes the 6-digit HS code, (in this case, #846719), and appends a 4-digit “Statistical Classification”, (e.g.- “5060”) to it.

HTS: #8467.19.50.60

Harmonized Tariff Schedule

The Harmonized Tariff Schedule (HTS) lists the United States tariff rates for all classes of goods imported into the US.

HTS #8467.19.50.60
Category:Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof:
2nd Level:Other
3rd Level:Other
Description:Designed for use in construction or mining
Unit of Quantity:No.
General Rate of Duty:4.5%
Special Rate of Duty:Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
Column 2 Rate of Duty:30%
Quota Quantity:
Additional Duties:

HTS tariff/duty notes, trade agreements, restrictions and other information related to HTS# 8467.19.50.60 are available on the U.S. International Trade Commission website at: hts.usitc.gov

NMFC®

National Motor Freight Classification® (US)

For (US) interstate, intrastate or international LTL Freight shipments an NMFC® Freight Class is assigned primarily based on density, (lb. per cubic foot).

Our Quick Quote tool estimates freight class based on size and weight entered and displays a list of carriers, services and rates for pallets of LTL Freight or delivery of parcels, (envelopes, boxes, shipping tubes, etc).

Get a Quick Quote
  
Dimensions

Freight Class may be adjusted up or down depending on type of item shipped, handling requirements, how “stow-able” the cargo is and the liability, (potential for loss, high value, etc).

Rates are lower for lower freight classes, and higher for higher classes. Shipments requiring special handling may be assigned to a higher freight class. Products which are high-values, easily damaged, prone to loss, may damage other freight, or are perishable may be assigned a higher freight class. Products which are large, or irregularly shaped, or un-stackable such as assembled furniture, machines, etc may be assigned a higher freight class.

In general, there are (18) NMFC® Freight Classes ranging from Class 50 to Class 500:

CLASSWEIGHT PER CUBIC FOOTEXAMPLES (Most dense to least dense)
50Greater than 50lbsNuts, bolts, steel
5535 – 50 LBBricks, cement
6030 – 35 LBCeramic tiles, auto accessories
6522.5 – 30 LBBooks, bottled liquor
7015 – 22.5 LBFood items, boxed paper
77.513.5 – 15 LBTires, snowplows, bath fixtures
8512 – 13.5 LBPharmaceuticals, wood furniture
92.510.5 – 12 LBComputers, refrigerators
1009 – 10.5 LBCookware, letal, wine cases, rugs
1108 – 9 LBFramed artwork, pneumatic tires
1257 – 8 LBSmall household appliances
1506 – 7 LBRefrigerators, sheet metal, bookcases
1755 – 6 LBClothing, couches, stuffed furniture
2004 – 5 LBAluminum parts, box springs
2503 – 4 LBPlasma TVs, upholstered furniture
3002 – 3 LBModel cars, assembled chairs, tables
4001 – 2 LBLight fixtures, deer antlers
500<1 lb.Ping pong balls, gold dust

For more information on NMFC® Freight Classes, visit the National Motor Freight Association, (NMFTA), website at: nmfta.org.

END USE: #21030

Foreign Trade Division, U.S. Census Bureau

End-use commodity classification identifies merchandise based on principal use rather than the physical characteristics.

End Use Classification (Expanded)
CodeHeading
2Capital goods, except automotive
21Nonelectrical machinery, except consumer-type
210Oil drilling, mining and construction machinery
21030Excavating machinery

The End Use code for Excavating machinery is #21030.

END USE may affect tariffs, duties, taxes, restrictions and other import/export considerations.

SITC: #74511

Standard International Trade Classification

SITC codes are used by the United Nations (UN) for classifying (international) import / export trade data.

SITC Classification (Expanded)
7MACHINERY AND TRANSPORT EQUIPMENT
74GENERAL INDUSTRIAL MACHINERY AND EQUIPMENT, N.E.S., AND MACHINE PARTS, N.E.S.
745
7451
74511TOOLS FOR WORKING IN THE HAND, PNEUMATIC

The SITC Classification for “TOOLS FOR WORKING IN THE HAND, PNEUMATIC” is #74511.

NAICS: #333120

North American Industry Classification System

NAICS was developed by the U.S., Canada and Mexico to make business statistics comparable across North America.

NAICS Classification (Expanded)
33
333Machinery Manufacturing
3331Agriculture, Construction, and Mining Machinery Manufacturing
33312Construction Machinery Manufacturing
333120Construction Machinery Manufacturing

The coding NAICS #333120 indicates this is a product of the Construction Machinery Manufacturing industry.