Freight Class & Shipping Codes

PLYWOOD, 1 PLY NONCON, OV 3.6MMX1.2MX2.2M,NT COV

ShipNerd provides discounted shipping rates for shipping plywood with at least one outer ply of nonconif wood, over 3.6mm thick 1.2mm wide and 2.2mm long, not surface covered, nesoi.

When shipping plywood with at least one outer ply of nonconif wood, over 3.6mm thick 1.2mm wide and 2.2mm long, not surface covered, nesoi via small package couriers such as UPS or Canpar Express, or LTL providers, be sure to specify any necessary special handling.

Use the quick quote tool to see the best shipping rates for your shipment of Wood and Articles of Wood, Wood Charcoal, Cork and Articles of Cork, Manufactures of Straw, of Esparto or of Other Plainting Materials, Basketware and Wickerwork.

Remember, package couriers only accept packages weighing up to 150lbs, and up to 165″ in length and girth combined. Shipments of Wood on pallets, or over these size and weigh limits will ship via LTL Freight using ShipNerd.

ShipNerd offers discounted shipping rates on wood products. Ship everything from small packaged items made of wood, to pallet loads of wood products.

HS: #441252

Harmonized System

The Harmonized System is a 6-digit coding standard for international classification of imported and exported products and commodities.

The HS number for plywood with at least one outer ply of nonconif wood, over 3.6mm thick 1.2mm wide and 2.2mm long, not surface covered, nesoi is #441252.

Schedule B: #4412523161

U.S. Export Commodity Classifications

United States export codes, more commonly known as “Schedule-B numbers” are based on the [international] Harmonized System and further classify the items you're shipping.

The Schedule-B number for “PLYWOOD, 1 PLY NONCON, OV 3.6MMX1.2MX2.2M,NT COV” is #4412523161 based on the classification below.

CodeDescription
Section IX Wood and Articles of Wood, Wood Charcoal, Cork and Articles of Cork, Manufactures of Straw, of Esparto or of Other Plainting Materials, Basketware and Wickerwork
Chapter 44 Wood and Articles of Wood; Wood Charcoal
Heading 12 Plywood, veneered panels and similar laminated wood.
Sub-Heading 52
Statistical Classification 3161 PLYWOOD, 1 PLY NONCON, OV 3.6MMX1.2MX2.2M,NT COV

NOTE: Schedule-B takes the 6-digit HS code, (in this case, #441252), and appends a 4-digit “Statistical Classification”, (e.g.- “3161”) to it.

HTS: #4412.52.31.61

Harmonized Tariff Schedule

The Harmonized Tariff Schedule (HTS) lists the United States tariff rates for all classes of goods imported into the US.

HTS #4412.52.31.61
Category:Plywood, veneered panels and similar laminated wood:
2nd Level:Other
3rd Level:Other
Description:Not surface covered
Unit of Quantity:m2 (and/or) m3
General Rate of Duty:Free
Special Rate of Duty:Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
Column 2 Rate of Duty:50%
Quota Quantity:
Additional Duties:

HTS tariff/duty notes, trade agreements, restrictions and other information related to HTS# 4412.52.31.61 are available on the U.S. International Trade Commission website at: hts.usitc.gov

NMFC®

National Motor Freight Classification® (US)

For (US) interstate, intrastate or international LTL Freight shipments an NMFC® Freight Class is assigned primarily based on density, (lb. per cubic foot).

Our Quick Quote tool estimates freight class based on size and weight entered and displays a list of carriers, services and rates for pallets of LTL Freight or delivery of parcels, (envelopes, boxes, shipping tubes, etc).

Get a Quick Quote
  
Dimensions

Freight Class may be adjusted up or down depending on type of item shipped, handling requirements, how “stow-able” the cargo is and the liability, (potential for loss, high value, etc).

Rates are lower for lower freight classes, and higher for higher classes. Shipments requiring special handling may be assigned to a higher freight class. Products which are high-values, easily damaged, prone to loss, may damage other freight, or are perishable may be assigned a higher freight class. Products which are large, or irregularly shaped, or un-stackable such as assembled furniture, machines, etc may be assigned a higher freight class.

In general, there are (18) NMFC® Freight Classes ranging from Class 50 to Class 500:

CLASSWEIGHT PER CUBIC FOOTEXAMPLES (Most dense to least dense)
50Greater than 50lbsNuts, bolts, steel
5535 – 50 LBBricks, cement
6030 – 35 LBCeramic tiles, auto accessories
6522.5 – 30 LBBooks, bottled liquor
7015 – 22.5 LBFood items, boxed paper
77.513.5 – 15 LBTires, snowplows, bath fixtures
8512 – 13.5 LBPharmaceuticals, wood furniture
92.510.5 – 12 LBComputers, refrigerators
1009 – 10.5 LBCookware, letal, wine cases, rugs
1108 – 9 LBFramed artwork, pneumatic tires
1257 – 8 LBSmall household appliances
1506 – 7 LBRefrigerators, sheet metal, bookcases
1755 – 6 LBClothing, couches, stuffed furniture
2004 – 5 LBAluminum parts, box springs
2503 – 4 LBPlasma TVs, upholstered furniture
3002 – 3 LBModel cars, assembled chairs, tables
4001 – 2 LBLight fixtures, deer antlers
500<1 lb.Ping pong balls, gold dust

For more information on NMFC® Freight Classes, visit the National Motor Freight Association, (NMFTA), website at: nmfta.org.

END USE: #13010

Foreign Trade Division, U.S. Census Bureau

End-use commodity classification identifies merchandise based on principal use rather than the physical characteristics.

End Use Classification (Expanded)
CodeHeading
1Industrial supplies and materials
13Selected building materials, except metals
130Lumber and other unfinished building materials
13010Plywood and veneers

The End Use code for Plywood and veneers is #13010.

END USE may affect tariffs, duties, taxes, restrictions and other import/export considerations.

SITC: #63433

Standard International Trade Classification

SITC codes are used by the United Nations (UN) for classifying (international) import / export trade data.

SITC Classification (Expanded)
6MANUFACTURED GOODS CLASSIFIED CHIEFLY BY MATERIAL
63CORK AND WOOD MANUFACTURES OTHER THAN FURNITURE
634
6343
63433PLYWOOD, VENEERED PANELS AND SIMILAR LAMINATED WOOD, OTHER BLOCKBOARD, LAMINBOARD AND BATTENBOARD

The SITC Classification for “PLYWOOD, VENEERED PANELS AND SIMILAR LAMINATED WOOD, OTHER BLOCKBOARD, LAMINBOARD AND BATTENBOARD” is #63433.

NAICS: #321211

North American Industry Classification System

NAICS was developed by the U.S., Canada and Mexico to make business statistics comparable across North America.

NAICS Classification (Expanded)
32
321Wood Product Manufacturing
3212Veneer, Plywood, and Engineered Wood Product Manufacturing
32121Veneer, Plywood, and Engineered Wood Product Manufacturing
321211Hardwood Veneer and Plywood Manufacturing

The coding NAICS #321211 indicates this is a product of the Hardwood Veneer and Plywood Manufacturing industry.